C-20 DeDuster®

Advantages

No more dust
Dust causes defects and maintenance problems. Remove it.

Small, light, efficient
High performance fines separation. No separate equipment stand.

Plug & Play
Install online or offline easily.

Performance you can see
Window in venturi zone and clear dust container.

See it in action

Operation

1Controlled Feed Zone: The C-20 DeDuster® has a vibratory feeder driven by a pneumatic motor that doses the resin, with whatever dust and streamers it contains, into the unit. A knob for adjusting the resin flow rate is easily accessible on the front of the C-20 DeDuster®.

2Ionizing Zone: Compressed air uniformly distributes negative ions from the ion generator to neutralize the static charge that holds dust on the surface of the resin.

3Venturi Zone: An efficient compressed air operated vacuum generator creates the counter flow air stream that separates streamers and dust from the falling pellets or regrind.

4Air Inlet: The cleaning air is pulled from the atmosphere through a filtered opening on the side of the C-20 DeDuster®.

5Dust Collector: Unwanted dust and streamers are sent to the attached mini dust collector which features a cyclone separator and cartridge filter for the air before it is released to the atmosphere. The dust collector is easily emptied without needing tools to access the dust drum.

Installation

The C-20 DeDuster® is only 18.2 kg and 337 mm tall. Just plug in the unit to a single-phase 24 V DC / 2 A power source, connect a 1/4 ” compressed air line, and position the level sensor on a sight glass (optional) below theC-20 DeDuster®.

Material is typically fed to the hopper above the C-20 DeDuster® by a common vacuum loader with a flapper valve to isolate the conveying vacuum from the C-20 DeDuster®. No changes are made to your existing vacuum system control. The C-20 DeDuster® features an integrated variable speed feeder on its inlet to dose resin into the cleaning zone at a metered rate.

Turning the feed rate control knob during setup changes resin flow rate for a wide range of applications. The feeder automatically stops the resin flow into the C-20 DeDuster® when the level sensor below the C-20 DeDuster® detects resin. Of course, the flow is started again when the down-stream process starts again and the level sensor does not detect resin anymore.

The maximum allowable temperature of the material that is processed by the C-20 DeDuster® is 82° C.

C-20 DeDuster® Top View

C-20 DeDuster® Front View

Specifications

Max product temperature

82° C Contact Pelletron about solutions for higher temperature requirements.

Flow rate (pellet throughput)

22 kg/h at 560 kg/m³

35 kg/h at 880 kg/m³

Energy supply required

24 V DC / 2 A / 50 Hz

Pneumatic hose Ø 6 mm with 6 bar inlet pressure

Approximate weight

Installed weight 18.2 kg

Shipping weight 20.9 kg

Compressed air requirements

17 Nm³/h

As easy as it gets

1 Request a quote

2 Get offer

3 Fast delivery

4 Plug & Play

5 Save money & time

Pelletron –
your experienced partner

for engineered Conveying Systems, Conveying Components and DeDusters®. Pelletron‘s highly experienced Bulkmatology® team has many years of knowledge in building Engineered Conveying Systems that meet the unique and individual needs of customers in a variety of industries.